英文合同模板匯編10篇
在人們越來越相信法律的社會中，越來越多的人通過合同來調和民事關系，簽訂合同也是最有效的法律依據之一。知道嗎，寫合同可是有方法的哦，以下是小編精心整理的英文合同10篇，僅供參考，歡迎大家閱讀。
英文合同 篇1
Anti-Dilution
反稀釋條款 The Conversion Price shall be adjusted on a full-ratchet basis for issuance of any securities of the Company at a purchase price less than the then-effective conversion price. Additionally, the Conversion Price shall be proportionally adjusted for share splits, share dividends, recapitalizations and the like.
若公司以低于屆時轉股價格的價格發行任何證券，轉股價格將調整為新發行的證券的價格。發生股票分拆、發放股票股利、再資本化和類似情形時，轉股價格亦將按比例作相應調整。
Protective Provisions
保護性條款 The consent of 75% of the CN holders will be required for any of the following actions of the Company and its subsidiaries:
公司及其子公司的下述事項須征得75%的可轉換債券持有人同意：
1) Amendment to the Memorandum of Articles of Association
公司章程的修改
2) Make any material change in the nature of its business
公司業務性質的任何重大改變
3) Merger, consolidation, reorganization, liquidation, dissolution, or winding-up
合并、收購、重組、清算、解散或停業
4) Acquire, grant an operating right in relation to or otherwise dispose of any shares or securities or material part of its business or assets (excluding current assets)
股權、重要業務或重大資產（不包括流動資產）的收購、處置，經營權的獲取、授予
5) Sell, mortgage, pledge, lease, transfer or otherwise dispose of a substantial portion of assets 重大資產的出售、抵押、擔保、租賃、轉讓或處置
6) Issuance of equity or debt securities, repurchase or redemption of any equity security: re-classification of issued securities; increases, decreases or alters the existing issued share capital 股權或債權證券的發行，任何股權證券的贖回，已發行證券的重新分類，現有股本的增加、減少或改變
7) Declaration or payment of dividends
宣布發放或支付股利
8) Enter into any joint venture, partnership or consortium arrangement
簽訂任何合營或聯營協議
9) Termination, or material amendment to the terms of stock option plan including number of options, vesting period, and exercise price of options
股票期權計劃的終止，或其中條款的重大改變（包括期權總額、行權期、行權價格）
10) Any loans to any director, officer or employee
提供給任何董事、高管人員或雇員的貸款
11) Any related party transaction outside the ordinary course of business
任何非正常業務之外的關聯交易
12) Incurrence of any external borrowing by the Company which exceeds US$ [ ], or a series of external borrowing by the Company which in the aggregate over any 12 month period exceed US$ [ ].
公司超過[ ]美元的任何外部借貸，或12個月內累計超過[ ]美元的一系列外部借貸的發生
13) Change the terms of employment of any employee whose base salary is in excess of US$50,000 per annum
任何底薪超過5萬美元/年的雇員雇用條款的改變
14) Hire or dismiss key management staff
聘用或解雇關鍵管理人員
15) Enter into any contract or arrangement which involves a consideration or payment exceeding US$[ ] to be made within any one year
任何1年內須支付對價超過[ ]美元的合同或安排的達成
16) Change of the Auditors or any material change in accounting practices or policies
審計師事務所的變更或任何會計制度或政策的重大改變
17) Select the listing exchange or the underwriters for an IPO or approve the valuation and terms and conditions for the IPO, whether or not the IPO is a Qualified IPO
IPO上市交易所或承銷商的選擇，或IPO（不管是否合格IPO）估值以及條款的批準
18) Annual budget including capital expenditure.
年度預算（包括資本支出）。
Undertakings by Founders
創始人股東保證 The Founders undertakes with the Investors that, at all times after the Closing Date, they will not sell or transfer any of their shares prior to the completion of a Qualified IPO, unless the prior written consent is obtained from the Investors.
創始人股東向投資人保證，投資交易完成日之后到合格IPO完成之前，不出售或轉讓任何持有的公司股份，除非事先得到投資人的書面許可。
Pre-emptive Rights
優先購買權 The Investors shall have a pro-rata right, based on their percentage equity ownership on a as-if converted basis, to participate in any subsequent equity financing of the Company on the same price and terms and conditions as the Company proposes to offer such new securities. The Investors will have a right to subscribe any portion of the new issue that is not subscribed by the existing shareholders.
投資人將有權優先按比例（根據假定轉換為普通股后在總股本中所占的比例），以相同價格和條件參與公司后續的權益融資。投資人將有權優先認購現有股東在新證券發行中未認購的股份。
Right of First Refusal, and Co-Sale Rights
優先受讓權和共同出售權 The Investors shall have first refusal rights and co-sale rights whereby any holder of Ordinary Shares who proposed to sell all or a portion of his shares to a third party must first permit the investors at their option (i) to purchase such shares on the same terms as the proposed transferee, or (ii) sell a proportionate part of their shares on the same terms offered by the proposed transferee. Such rights of first refusal and co-sale rights would terminate upon the closing of a Qualified IPO.
投資人享有優先受讓權和共同銷售權，任何欲向第三方出售全部或部分股份的普通股股東須首先允許投資人 (i) 以與擬受讓人同等條款購買該股份，或 (ii) 以同等條款按比例向擬受讓人出售股份。合格IPO完成后，該優先受讓權和共同出售權即終止。
Information Rights
信息獲取權 The Company shall provide to all Investors:
公司須向所有投資人提供：
1) audited consolidated profit and loss accounts, balance sheets and statements of cash flow of the Company within three (3) months after the end of each financial year;
每個會計年度結束后3個月內提供公司經審計的合并損益表、資產負債表和現金流量表；
2) monthly management accounts of the Company and individual company standard accounts for each entity within the Company, to be provided within 15 business days after each month end; 每月度結束后15個工作日內提供公司月度管理報表及公司內每一主體單獨的標準報表；
3) quarterly consolidated management accounts within 30 days after each quarter end;
每季度結束后30日內提供合并的季度管理報表；
4) annual budgets and forecasts not less than 30 days prior to the commencement of each financial year;
不遲于每個會計年度開始30日前提年度預算和財務預測；
5) all other information which Investors may reasonably require within 7 days of the Company’s receipt of a notice requesting such information, or a clear demonstration of best efforts if more than 7 days are required;
在收到信息索要通知后7日內提供投資人合理要求的任何其他信息，如果需要7天以上，則需提供公司已盡最大努力的清楚證明；
6) full details of any progress in relation to any IPO of all or part of the business as soon as practicable;
及時提供公司全部或部分業務IPO相關的任何進展的細節；
7) access to books and records, the facilities, properties, management, employees, and accounting and legal advisors of the Company at any reasonable time after reasonable prior notice by Investors;
在投資人提前通知后的合理時間內，準許其接觸帳簿和記錄、設施、房產、管理層、員工，以及會計和法律顧問；
8) prompt notification of any withdrawal of bank facilities of the Company, and the Company’s best efforts to restore adequate banking facilities;
在銀行撤銷公司任何授信額度時，迅即通知投資人，以及公司為恢復足夠的銀行授信所做的最大努力；
9) prompt notification of any material litigation or any circumstances that would likely give rise to material litigation; and
迅即通知任何重大訴訟或可能導致重大訴訟的情形；以及
10) prior notification of any change in the equity percentages of any subsidiary or affiliate, or any joint venture to which the Company is a party.
提前通知投資人任何下屬子公司、附屬企業或公司作為其中一方的合資企業股權結構的任何變化。
All financial statements shall be prepared to Investors in English and prepared in accordance with IAS.
所有財務報表均應以英語提供給投資人，并依照國際會計準則編制。
These information rights shall terminate upon the IPO of the Company.
公司IPO后，投資人的上述信息獲取權即終止。
Registration Rights
注冊權 1) Demand, S-3, F-3 or Equivalent, and Piggyback Rights: The specific terms of registration rights would include at least the following: (i) starting three years after the Closing Date, the holders of 50% of the outstanding CN may request a Form F-1 registration statement to be filed; (ii) starting one year after the IPO, two (2) demand registrations upon request of holders of 50% of the outstanding CN on Form S-3 or F-3 or equivalent if listed on a non-US stock exchange; (iii) unlimited piggyback registrations in connection with registrations of shares for the account of the Company or selling shareholders exercising demand rights; and (iv) cut-back provisions providing that registrations must include at least 25% of the shares requested to be included by the holders of registrable securities and employees, directors, etc. must be cut back before the holders of registrable securities would be cut back.
要求注冊、按S-3、F-3（或相當的表格）注冊和附帶注冊權：注冊權的特定條款至少包括如下內容：(i) 本次融資完成3年后，持有50%已發行可轉換債券的股東有權要求公司向美國SEC提交F-1注冊申請; (ii) IPO后1年內，持有50%已發行可轉換債券的股東有權向公司提出兩次按S-3、F-3（或相當的表格，若在美國之外的股票交易所掛牌）請求注冊; (iii) 次數不限的當公司或其他出售股票的股東注冊時的附帶注冊權或與其相當的權利；以及 (iv) 注冊削減條款：任何注冊削減條款應規定，所有注冊（除與IPO相關的注冊）應至少滿足原持有人要求注冊數的25%，且股東要求的注冊數被削減的前提是公司的董事、高管、員工、顧問和普通股股東要求的注冊數首先被削減。
2) Expenses: The Company would bear the registration expenses (excluding underwriting discounts and commissions but including all other expenses related to the registration) of all such demand, piggyback and S-3, F-3 or equivalent registration.
費用：公司應承擔上述注冊的注冊費用（不包括承銷折讓與傭金，但包括所有其他與注冊相關的費用）。
3) Transfer of Rights: The registration rights may be transferred.
權利的轉讓：注冊權可以轉讓。
4) Termination: The registration rights would terminate on the earlier date of: (1) five (5) years after the closing of this financing, or (2) when any holder can sell all of such holder’s shares in any three-month period without registration pursuant to Rule 144 under the 1934 Act.
權利的終止：注冊權在下述較早實現之日終止：(1) 本次融資完成5年后，或 (2) 任何股東可以依據美國1934年《證券交易法》第144條在任何3個月期內出售所有股份而不必登記之時。
Exclusivity
排他性 The Investors will have the exclusive right to negotiate and complete the Investment for a period of eight weeks from the signing of this Term Sheet. During this Exclusive Period, neither the Company, nor the Founders, shall provide information, solicit or entertain proposals, or conduct any discussion or negotiation with any third party regarding the issuance of shares or other securities or instruments by the Company, or any other subsidiary or affiliate of the Company.
自本投資條款簽署之日起八周內，投資人享有商洽并完成投資的排他性權利。在排他期限內，公司或公司創始人股東均不得就公司、子公司或其他附屬公司發行股份、其他證券或金融工具事宜向任何第三方提供信息、發出要約邀請或意向，或與第三方進行任何探討或談判。
Costs
費用 The Company shall bear all costs and expenses reasonably incurred by the Investors in relation to the Investors’ investment contemplated under this Term Sheet including but not limited to the preparation, negotiation and execution of Transaction Documents and the legal, financial, commercial and technical due diligence undertaken by the Investors, up to a maximum limit of US$200,000.
投資人依照本投資條款而合理支出的全部成本和費用（包括但不限于交易文件的準備、談判、實施以及法律/財務/商業/技術盡職調查費用）由公司承擔，其上限為20萬美元。
In the event Completion does not take place, the Company and the Investors shall bear their own costs and expenses, provided that if the Company unilaterally decides not to proceed with Completion, the Company shall bear all costs and expenses reasonably incurred by or on behalf of the Investors in relation to the Investors’ intended investment under this Term Sheet including but not limited to the preparation and negotiation of the Transaction Documents and the due diligence undertaken by the Investors, up to a maximum limit of US$200,000.
在投資最終未能完成的情形下，公司和投資人將自行承擔各自的成本和費用。若公司單方面決定終止投資完成，公司將承擔投資人（或通過其代表）依照本投資條款而合理支出的全部成本和費用（包括但不限于交易文件的準備、談判以及盡職調查費用），其上限為20萬美元。
Confidentiality
保密性 The terms and conditions stipulated in this Term Sheet, including its existence, and the information about the Company shall be confidential information and shall not be disclosed to any third party unless required by applicable law or regulations of any stock exchange. This restriction does not apply to employees, legal counsels, accountants, and other professional advisors of the Company, the Founders, or the Investors, on a need-to-know basis.
本投資條款規定的條款和條件，包括本投資條款的存在，以及關于公司的信息均為保密信息，除非適用法律或股票交易所規則要求，不得向任何第三方披露。上述限制不適用于公司、創始人股東或投資人的員工、會計師、律師及其他專業顧問（因其需要獲知相關信息）。
Language of Performance
履行語言 All notices, communications, and proceedings relating to this Investment and the exercise or performance of the parties’ respective rights and duties will be in English.
所有與本次投資相關的通知、來往函件和記錄，以及各方權利和責任的行使、履行，均應以英語進行。
Termination
終止 The CN and CN Holders’ rights hereunder terminate upon the closing of any Qualified IPO, except for any public offering or registration rights, which continue for the respective agreed periods. In the event of a Qualified IPO, the terms of the CNs and CNs will have to be disclosed in the offering document / prospectus and therefore the confidentiality clause can no longer be able to complied with.
本投資條款中可轉換債券及可轉換債券持有人的權利在合格IPO完成后即終止，但公開發行及注冊權除外（該權利持續至相應的約定期限）。合格IPO發生時，可轉換債券及可轉換債券的相關條款須在發行文件/招股說明書中披露，因而保密條款不再適用。
英文合同 篇2
合同編號：_________________
contract no：_______________
簽訂日期：_________________
date：______________________
簽訂地點：_________________
signed at ： _______________
電 話：____________________
tel： ______________________
傳 真：____________________
fax：_______________________
電 報：____________________
cable： ____________________
電 傳：____________________
telex： ____________________
電 話：____________________
tel： ______________________
傳 真：____________________
fax：_______________________
電報：_____________________
cable： ____________________
電傳：_____________________
telex： ____________________
經買雙方確認根據下列條款訂立該合同：
the undersigned sellers and buyers have confirmed this contract in accordance with the terms and conditions stipulated below ：
1. 貨號
art no. 名稱及規格
descriptions 單位
unit 數量
quantity 單價
unit price 金額
amount
合計：_______________
totally：____________
總值（大寫）_______
total value：（in words）
允許溢短___%
____% more or less in quantity and value allowed.
2.成交價格術語：□ fob □ cfr □ cif □ ddu □
terms： ________________
3.包裝：______________
packing： ______________
4.裝運碼頭：__________
shipping marks： _______
5.運輸起訖：由______經______到 ________
shipment________from_________to ________
6.轉運：□ 允許 □ 不允許； 分批裝運：□ 允許 □ 不允許
tran shipment： □ allowed □ not allowed
partial shipments： □allowed □ not allowed
7.裝運期：___________
shipment date： _______
8.保險：由____按發票金額110%投保____險，另加保____險至____為止。
insurance ： to be covered by the for 110% of the invoice value covering additional form ____to________
9.付款條件：
terms of payment：
買方不遲于_____年_____月_____日前將100%的貨款用即期匯票/電匯送抵賣方。
the buyers shall pay 100% of the sales proceeds through sight（demand）draft/by t/t remittance to the sellers not later than
買方須于_____年_____月_____日前通過 銀行開出以賣方為受益人的不可撤銷____天期信用證，并注明在上述裝運日期后 天在中國議討有效，信用證須注明合同編號。
the buyers shall issue an irrevocable l/c at sight through in favour of the sellers prior to indicating l/c shall be valid in china through negotiation within day after the shipment effected ， the l/c must mention the contract number.
付款交單：買方應對賣方開具的以買方為付款人的見票后____天付款跟單匯票，付款時交單。
documents against payment： （d/p）
the buyers shall duly make the payment against documentary draft made out to the buyers at sight by the sellers.□承兌交單：買方應對賣方開具的以買方為付款人的見票后_____天承兌跟單匯票，承兌時交單。
documents against acceptance（d/a）
the buyers shall duly accept the documentary draft made out to the buyers at days by the sells.
10.單據：賣給方應將下列單據提交銀行議付/托收。
documents require：the sellers shall present the following documents required for negotiation/collection to the banks.
整套正本清潔提單。
full set of clean on board ocean bills of lading.
商業發票一式____份。
signed commercial invoice in___copies.
裝箱單或重量單一式_____份。
packing list/weight memo in copies.
由_____簽發的質量與數量證明書一式______份。
certificate of quantity and quality in copies issued by ______
保險單一式______份。
insurance policy in copies.
由____簽發的產地證一式____份。
certificate of origin in copies issued by __________
11.裝運通知：一俟裝運完畢，賣方應即電告買方合同號、品名、已裝載數量，發票總金額，毛重，運輸工具名稱及啟運日期等。 shipping advice ： the sellers shall immediately ， upon the completion of the loading of the goods ， advise the buyers of the contract no ， names of commodity ， loaded quantity ， invoice values ， gross weight ， names of vessel and shipment date by tlx/fax.
12.檢驗與索賠：
inspection and claims：
①賣方在發貨前由 檢驗機構對貨物的品質、規格和數量進行檢驗，并出具檢驗證明書。
the buyers shall have the qualities ， specifications ， quantities of the goods carefully inspected by the inspection authority ， which shall issue inspection certificate before shipment.
②貨物到達目的的口岸后，買方可委托當地的商品檢驗機構對貨物進行復檢。如果發現貨物有損壞、殘缺或規格、數量與合同規定不符，買方須于貨到目的口岸的 天內憑 檢驗機構出具的檢驗證明書向賣方索賠。
the buyers have right to have the goods inspected by the local commodity inspection authority after the arrival of the goods at the port of destination. if the goods are found damaged / short / their specifications and quantities not in compliance with that specified in the contract， the buyers shall lodge claims against the sellers based on the inspection certificate issued by the commodity inspection authority within days after the goods arrival at the destination.
③如買方提供索賠，凡屬品質異議須于貨到目的的口岸之日起 天提出；凡屬數量異議須于貨到目的口岸之日起 天提出。對所裝貨物所提任何異議應由保險公司、運輸公司或郵遞機構負責的，賣方不負任何責任。
the claims ， if any regarding to the quality of the goods shall be lodged within days after arrival of the goods at the destination ， if any regarding to the quantities of the goods ， shall be lodged within days after arrival of the goods at the destination . the sellers shall not take any responsibility if any claims concerning the shipping goods is up to the responsibility of insurance company / transportation company /post office.
13.人力不可抗拒：如因人力不可抗拒的原因造成該合同全部或部分不能履約，賣方概不負責，但賣方應將上述發生的情況及時通知買方。 force majeure ： the sellers shall not hold any responsibility for partial or total non-performance of this contract due to force majeure . but the sellers shall advise the buyers on times of such occurrence.
14.爭議之解決方式：
disputes settlement ： 任何因該合同而發生或與該合同有關的爭議，應提交中國國際經濟貿易仲裁委員會，按該會的仲裁規則進行仲裁。仲裁地點在中國深圳。仲裁裁決是終局的，對雙方均有約束力。
all disputes arising out of the contract or in connection with the contract ， shall be submitted to the china international economic and trade arbitration commission for arbitration in accordance with its rules of arbitration in shenzhen ， china . the arbitral award is final and binding upon both parties.
15.法律適用
law application ：
該合同之簽訂地、或發生爭議時貨物所在地在中華人民共和國境內或被訴人為中國法人的，適用中華人民共和國法律，除此規定外，適用《聯合國國際貨物銷售公約》。
it will be governed by the law of the people‘s republic of china under the circumstances that the contract is singed or the goods while the disputes arising are in the people’s republic of china or the deffendant is chinese legal person ， otherwise it is governed by united nations convention on contract for the international sale of goods .
該合同使用的fob、cfr、cif、ddu 術語系根據國際商會《incoterms 1990》
16.文字：該合同中、英兩種文字具有同等法律效力，在文字解釋上，若有異議，以中文解釋為準。
versions ： this contract is made out in both chinese and english of which version is equally effective .conflicts between these two language arising therefrom . if any ， shall be subject to chinese version .
17.附加條款（該合同上述條款與本附加條款有抵觸時，以本附加條款為準）
additional clauses ： （conflicts between contract clause here above and this additional clause ， if any ， it is subject to this additional clause）
18.該合同共_____份，自雙方代表簽字（蓋章）之日起生效。
this contract is in copies ， effective since being signed / sealed by both parties： ______
賣方代表人：________________________ 買方代表人：_______________________
representative of the sellers ：____ representative of the buyers ：____
簽字：______________________________ 簽字：_____________________________
authorized signature ：_____________ authorized signature ：____________
英文合同 篇3
鑒于Whereas
一、 （下稱“債務人”）與乙方及（下稱“委托貸款人”）簽訂了編號為 的
《委托貸款合同》（以下稱“主合同”）；
二、甲方愿意為債務人在主合同項下的債務提供抵押擔保；
三、委托貸款人委托乙方作為委托貸款人的代理人以乙方的名義與甲方簽署本合同。
經協商一致，特訂立本合同，以便共同遵守。
Ⅰ.(hereinafter called “debtor”) signed the number The Entrusted Loan Contract
(hereinafter called “main contract”) with Party B and (hereinafter called “entrusted lender”);
Ⅱ.Party A is willing to provide mortgage guarantee for the debtor under the main contract;
Ⅲ.Entrusted lender entrusts Party B as his or her agent signing this contract with Party A in the name of Party
B.
By consensus, both Parties signed this contract, in order to observe together.
第一條 抵押財產
甲方以本合同 “抵押財產清單”所列之財產設定抵押。
Article 1 The mortgaged property
Party A setting mortgages as "The mortgaged property list" of this contract.
第二條 擔保范圍
主合同項下本金（幣種） （金額大寫） 及利息（包括復利和罰息）、違約金、賠償金、債務人
應向委托貸款人支付的其他款項以及實現主合同項下債權與擔保權利而發生的費用（包括但不限于訴
訟費、仲裁費、財產保全費、差旅費、執行費、評估費、拍賣費、公證費、送達費、公告費、律師費
等）。
Under the items of the main contract, the debtor shall pay to entrusted lender like principal( currency )(ammount in words), interests( including compound interest and penalty
interest), penalty, compensation, and some other payments, and including costs caused by
achieving creditor's rights and guarantee right (including but not limited in legal fees, arbitration
fees, property preservation fees, travel expenses, execution fees, valuation fees, auction fees, notaries fees, delivery fees, advertising fees, counsel fees, etc.)
第三條 抵押財產登記
雙方應于本合同簽訂后個工作日內到相應的登記部門辦理抵押登記手續。甲方應于抵
押登記完成之日將抵押財產的他項權利證書、抵押登記文件正本原件及其他權利證書交乙
方持有。
Article 3 Mortgaged property registration
The two Parties shall go to the corresponding registration department to handle the mortgage
registration formalities after signing the contract in working days. Party A shall
give the mortgaged property and certificates of other rights, the original copy of mortgage
registration documents and other certificates of rights to Party B to hold the day of complement
of mortgage registration.
第四條 主合同變更
一、如果主合同條款變更，甲方同意對變更后的主合同項下債務承擔擔保責任。但未經甲方事先同意，主合同項下債務履行期限延長或債權本金金額增加的，甲方僅依照本合同的'約定對變更前的主合同項下債務承擔擔保責任。
二、委托貸款人或債務人發生改制、合并、兼并、分立、增減資本、合資、聯營、更名等情形，甲方的擔保責任不發生減免。
三、主合同項下債權轉移給第三人的，甲方應協助辦理抵押變更登記手續。
Article 4 Alteration of main contract
I If the main terms of the contract change, Party agreed to assume security responsibility for the main contract after the change in debt. But without the prior consent of the PartyA, the main contract to fulfill the debt or extend the period of the principal amount of debt increases, Party A only assume security responsibility for the main contract before the change in debt in accordance with this contract.
II Entrusted lender or debtor restructuring, merger, consolidation, division, increase or decrease of capital, joint ventures, joint venture, renamed and other circumstances, no guarantee liability waiver occurred Party A. III Claims under the main contract to a third party, the Party A shall assist for mortgage registration changes.
第五條 抵押財產的占有、保管與保險
一、甲方應妥善地對抵押財產進行占有、保管和維修保養，合理使用抵押財產，維持抵押財產完好，按時繳納與抵押財產相關的各項稅費。
二、甲方委托或同意第三方占有、保管、使用抵押財產的，應當告知該第三方抵押權的存在，并要求其保持抵押財產的完好。甲方不因此免除前款中的義務，同時應對該第三方的行為承擔責任。
三、抵押財產造成人身或財產損害的，應由甲方自行承擔賠償責任。如果乙方或委托貸款人因此遭到索賠而承擔了責任，或為甲方墊付了賠償金，則乙方或委托貸款人有權向甲方追償。
四、抵押財產的保險由甲方與委托貸款人另行協商。
Article 5 Possession , custody and insurance of the mortgaged property
I Party A should be properly carried out occupy, custody and maintenance for the mortgaged property, rational use of the mortgaged property to maintain the integrity of the mortgaged property, pay all the taxes of mortgaged property-related timely.
II Party A agreed or entrusted a third party to occupy, custody and use of the mortgaged property, it shall inform the existence of the third-party mortgage, and request the mortgaged property intact. Party A is not exempt obligations of the preceding paragraph, while should addressing the responsible for the behavior of the third party.
III The mortgaged property causing damage to persons or property, shall be liable for their own party. If Party
B or entrusted lender are claimed the liability for, or paid compensation for Party A, Party B or entrusted lender shall have the right to recourse against the party a.
IV The insurance of the mortgaged property will be negotiated additionally by Party A and the entrusted lender.
英文合同 篇4
甲方全名：
乙方全名：
甲乙雙方經友好協商，就資料翻譯服務事宜簽訂此合同。合同中價格以人民幣為單位（含稅）。
一、甲方委托乙方將主題為_______________資料由__________文譯成__________文，資料共計為字（終以實際的翻譯字數為準），甲方同意為此交付對應的服務費用。
二、交稿日期及方式：從合同生效日（即甲方支付翻譯費定金日）開始的_____天內（不包括周六，周日），也就是______年_____月_____日起至______年_____月_____日止。如果實際的翻譯字數超過了合同約定字數，則按每日平均_____字的速度順延。如果乙方在合同期內未能完成該翻譯項目，則乙方必須按照甲方指定的日期內完成未完成的部分（即該部分）。如果仍未按時完成，則甲方有權僅支付乙方翻譯費用總額的5%。稿件交付方式為_____。為減輕雙方核算的麻煩，雙方在此同意，乙方交稿后，甲方在兩日內（確認期）對其予以確認，包括數量和質量。超過兩日甲方未做任何答復，則視為甲方對乙方所交付的翻譯稿件為可接受之稿件。
三、譯稿形式：譯稿以中文版文件形式交付，乙方負責所有翻譯后的錄入、排版和校對工作。交稿時乙方必須向甲方提供兩種文檔即電子文檔和物理文檔。即除了交付磁盤文件外，乙方還必須為甲方準備簡單裝訂后的一套打印件（與相應的原文裝訂在一起）。
四、費用計算方法：按中文版"字數"的統計數字為準。翻譯費用為（大寫）__________千字，（小寫）元/千字。
五、付款：甲方在交付翻譯原稿的同時交付翻譯定金，為總額的3%，即_____元，取得全部譯文資料的兩天內甲方應全額支付整個翻譯款項。
六、原文版權：甲方保證其提供的資料有正當來源，保證其享有對該資料的翻譯權，據此，翻譯行為將不會侵犯第三方的版權或著作權，亦不會侵犯第三方的其它任何權利。
七、譯文版權：翻譯后形成的資料版權屬甲方。
八、質量保證：甲方向乙方提供原稿后，乙方必須在最快的時間內將整個翻譯項目的進度計劃提供于甲方參考，同時就翻譯項目中出現的一些疑問提出咨詢。甲方有義務回答這些咨詢。乙方保證其所交付的譯稿在制作上及工藝上均無缺陷。關于譯稿與原文在含義上的一致性，乙方在本合
同下為此做全面保證。乙方不保證使用該譯文一定可達到何種結果，亦不對由此產生的直接或間接的結果負責，甲方如認為所接收的譯文存有缺陷，應在確認期內通知乙方，逾期無效。乙方對甲方指出的譯文缺陷，應盡快修改完善。如果在甲方指出缺陷后乙方未能在指定的時間內糾正改善或修改后仍然存在嚴重的錯誤，乙方應該將翻譯總費用的5%退還給甲方。
九、有限責任：乙方在本合同下負有如下有限責任：
（1）乙方為甲方提供的原文資料永久保密，不得擅自將原文資料及其內容透露給第三方，也不得擅自將這些機密資料用作他途；否則甲方保留其訴諸法律的權利
（2）乙方保證譯文語句流暢，符合成文語言的語法規則和習慣；并盡最大的可能使譯文與原文含義一致。
十、免責條款：乙方在本合同下對下列事件不負任何直接或連帶責任：
（1）因甲方侵犯第三方版權/專利權而引起的第三方的一切及任何損失；
（2）因原文中存有錯誤而引起的一切及任何損失；
（3）因譯文與原文一致而引起的一切及任何損失；
（4）因甲方收到譯文后自行改寫或丟失所引起的一切及任何損失。
十一、甲方逾期交款，無正當理由者，則按日交納所欠金額的千分之五作為違約金。本合同中如有其它未盡事宜，雙方協商解決。協商不成，據《中華人民共和國民法典》處理。
十二、合同終止：乙方交清譯成資料，甲方交清服務費用，確認期滿后本合同自行終止（第九條除外）。如經甲乙雙方協商，或因一方違約，或因不可抗力影響，雙方同意不再繼續合同的，合同將中止執行。
十三、保密條款；關于本合同及其相關的內容，甲乙雙方均不得以任何形式向第三方透露，以保護雙方的權益。
十四、其它：本合同一式兩份，均具同等法律效力。合同自簽訂之日起生效。
甲方簽名蓋章：
乙方簽名蓋章：
英文合同 篇5
The buyer: the seller: ____________ ____________
Address: Address: ____________ ____________
Tel: ____________ Tel: ____________
Fax: Fax: ____________ ____________
Contact: Contact: ____________ ____________
The sale of the friendly negotiation of both parties, the buyer seller commissioned processing production ________ mould Co ______ set. The two sides reached the following processing agreement
Basic mould of die:
Product name serial number part name point number (mold type) mold single price (RMB yuan) delivery condition
Total price: (including 17% VAT)
The above set of mould material: _____________________
(the above mold materials are provided by the seller).
I. The rights and responsibilities of the two parties:
Buyer's responsibility and rights are as follows:
1. the buyer is responsible for the delivery of the R & D requirements and plans of the seller's project, and provides the sales forecast as far as possible.
2. the buyer is responsible for the delivery of the product design drawings and other related technical information required by the seller to the seller and the technical support.
3., the buyer has the sole right to interpret the product design drawings and related technical data delivered to the seller. When there is ambiguity, the Seller shall consult the buyer's opinion and confirm it by the buyer.
4. after the seller completes the design and manufacture of the mould, the buyer will go to the seller's site to verify the mold, or to provide the product sample to the buyer for confirmation and confirmation by the seller. The moulds referred to in this contract include the mould of the product itself and the fixture and mould needed for the subsequent production.
The rights and responsibilities of the seller are as follows:
1. the seller is responsible for the design and manufacture of the moulds according to the product design drawings and other related technical information provided by the buyer.
Be responsible for completing the mold according to the buyer's design requirements in accordance with the stipulations of the contract.
2. the Seller shall be responsible for providing timely certification and sample test, trial production of desired products. At the same time the seller must provide the details of the related products.
The detailed test report is for the buyer's confirmation. In case of repair / modification, the test report is also attached at the same time.
The buyer does not bear any responsibility.
1.5 the Seller shall give the buyer the corresponding compensation in the form of the buyer's approval as the seller causes the buyer to spend the labor and cost outside the normal technical support as a result of the seller's cause.
2. the progress of the model:
2.1 the seller after the receipt of the buyer after the confirmation of product drawing, which began to enter the mold design and production stage, open cycle for ________ days
2.2 due to buyer's cause the delay of mold making progress is not calculated.
2.3 if the seller's mold making process and other mistakes lead to the failure of the mold to be accepted and the buyer is in urgent need of production.
At the same time, the production should be arranged with the existing mold, and the die should be reopened according to the requirements of the drawings and samples.
3. mode of payment:
Party B agrees that Party A will pay the payment as follows.
3.1 separate settlement: Monthly knot, 60 days after the opening of the ticket, open 17% VAT invoices.
3.1.1 of the total amount of the contract manufacturing batch mould (including VAT) for RMB _________ yuan (RMB ________ yuan), the buyer to pay the total amount of _____% mold, mold ___% residual cost allocation in the first 50K products, if the number of orders less than 50K, the buyer shall supply the seller after the unamortized tooling cost.
3.1.2 from the two sides after the signing of the contract, the seller to provide value-added tax invoices (mold total ____%), the buyer within twenty working days of payment.
4. product order: only after the quality acceptance of the product sample is qualified and the buyer's written confirmation, the seller may accept the order of the third party authorized by the buyer or the buyer. The order contract signed by third parties authorized by the buyer with the buyer's seller is subject to this contract.
Four, product quality assurance
After the seller has completed the mold, the Seller agrees to guarantee the quality of the product in accordance with the buyer's quality standard (the first confirmation report).
The buyer reserves the right to modify the content of the quality standard in accordance with the actual needs.
Five. The ownership of the mold
1. the ownership of all moulds and clamping fixtures and their assembly drawings and parts drawings (including 2D and 3D) involved in the contract shall be owned by the buyer, and the Seller shall not interfere with the buyer's disposition of the molds. If the seller is responsible for the custody of the seller, the Seller shall not supply the mould to the third party without the buyer's consent, otherwise the buyer shall have the right to ask the seller to return the mold fee and compensate for the loss.
2. when the buyer pays the mold cost, the seller must cooperate with the buyer or the third party designated by the buyer to transfer the inspection and accept the replacement of the die from the seller's place, and will replace the worn parts at the expense of itself, so as to ensure the restart of production. The seller is obliged to assemble, rust and pack the moulds and send it to the place designated by the buyer. All mold assembly drawings and part drawings (including 2D and 3D) and all clamping devices must be transferred to the buyer at the same time.
3., during the process of mold transfer, such as the improper assembly, rust prevention or packaging of the seller, it will cause damage to the mold, and all direct and indirect losses arising therefrom shall be borne by the seller.
Six, mold maintenance
1., the Seller guarantees the service life of the mould 500 thousand times, and the seller is responsible for free maintenance during this period. If the mold is not used during the service life, the Seller shall be responsible for changing or re opening the mold and taking the corresponding cost.
2. the seller should die changes, maintenance and repairs in a timely manner and register, whether such a modification, maintenance and repair are
The buyer made it. If the buyer is to ask the relevant technical details or evidence, the buyer may register with the time without notice. The Seller shall give the buyer a copy of the record once every three months. The seller should take the initiative to complete this task on a regular basis without the buyer's request.
Six. Intellectual property rights
The product and the buyer 1. involved in this contract to provide design drawings and other information in the intellectual property is owned by the buyer, the buyer without permission, the Seller shall not disclose to any company or individual, otherwise all the losses resulting from the seller; the buyer only agreed to all data and information provided by the seller by the buyer the purpose of this contract based on the,
2. the Seller agrees to the design drawings will not be provided by the buyer and other data or information for the purpose of non contract other than the seller or the buyer has the right to pursue responsibility; without written permission from the buyer, the Seller shall not in publications, advertising or other written and oral form to the seller to provide or have provided any data and information.
3., without the buyer's license, it is strictly prohibited for the seller to use this mould to supply other customers other than the buyer or the buyer's designated customer, otherwise all direct and indirect losses arising from it shall be the seller's responsibility.
4. other undisclosed matters of confidentiality are carried out in accordance with the "confidentiality agreement" signed by the buyer and the seller.
Seven. Liability for breach of contract
1. the Seller shall be liable for breach of contract if the seller fails to complete the mold making and sample delivery according to the progress of each stage specified in the 2.1. The Seller shall pay the buyer a fine of 2% of the total amount of this contract at a time of one day of delay. The amount of the penalty is not more than the total amount of the contract.
2., if the seller's cause causes the seller's quality to be supplied to the buyer can't meet the buyer's requirements, and the other materials will be lost and scrapped during the assembly process, the seller will fully compensate for the loss and scrap materials and the resulting artificial / stop line costs. The two parties may sign separately the raw material for production.
3. the quality and progress of the product provided to the buyer by the seller for the seller's cause can not reach the buyer.
Place)
3. when the mold is certified by the buyer, the seller is responsible for the seal of the mold. If the buyer agrees that the seller is responsible for the subsequent processing and production of the products, the Seller shall be responsible for the repair and maintenance of the moulds, and the Seller shall make the batch production according to the order of the third party authorized by the buyer or the buyer.
4. for all the molds produced by the buyer, the Seller shall provide the buyer with detailed design drawings. All drawings must be made in AutoCAD or pro-eng (pro-el2) and must be transmitted to the buyer in electronic form before the mold opening for approval.
Two. Technical terms:
1. repair and maintenance of the mold: the seller is responsible for the repair and maintenance of the mold during the production process.
2., after no dispute between the two sides, the buyer will provide the product design drawings and related technical information to the seller, and send the engineer to the seller's technical exchange or the seller send the engineer to the buyer for technical communication. The product drawings and technical requirements list is attached to Annex 1.
3. the seller promised to use the quality requirements of the mold for the system to produce products to the buyer
4. the seller promised to use the mold for the system to produce the product can reach the seller's delivery capacity:
Nissan energy: _______k, monthly capacity: ______k
5. the seller promises that all the moulds involved in this contract can be reached to 400 thousand times.
6., without the buyer's permission, it is strictly prohibited for the seller to contract the whole part of the contract involved in the contract to other companies for processing. Otherwise, the Seller shall be liable for breach of contract in accordance with the breach clause of the contract as a breach of contract.
Three. The terms of business:
1. mold price:
1.1 after negotiation between the two parties, the seller will provide the final offer of the mould approved by the buyer and sign the price confirmation as an indispensable part of the contract.
The total amount of 1.2 contract (including VAT mold ____%) rmb_______.
1.3 the total cost of the price of the mold contains the following expenses, and the Seller shall not ask the buyer for the following reasons:
1.3.1 the cost of all the fixtures and tools required by the seller for the molding / two processing / assembly of the product;
1.3.2 the seller, according to the contract, carries out the cost of material, equipment and manpower for mould design, test mould.
1.3.3 the cost of the sample (800 sets) provided by the seller to the buyer for the certification of the mold and product;
1.3.4 the seller is the cost of the die vulnerable spare parts to ensure the normal production of the mold;
1.3.5 the cost of the related tools and tools for other processes that are prepared for the normal production of the product.
1.4 when the written request of the buyer the seller according to the change of the product design for the mould modification, if the mould modification is relatively simple, including less mold material changes and other simple changes from the mold, the seller to the buyer without charges; if the modification is complex, great influence on the whole structure of the mold, then the seller according to the modified working hours for mold to the buyer by the buyer offer, the corresponding mold modification cost. The buyer shall not bear any responsibility for the repair or modification of the mold due to the seller's reason, due to the failure of the mold to meet the buyer's requirements.
1.5 by the seller to the buyer's manual and cost technical support from the normal cost, the Seller shall give the buyer recognized the way the corresponding compensation.
2. the progress of the model:
2.1 after the seller has received the product drawing file after the buyer's confirmation, that is,
The cost of artificial / stop line formation. The two parties may sign separately the raw material for production.
3. if the seller has caused the seller to the buyer of the product quality and schedule is not up to the requirements of the buyer, the buyer and customer missed the best time to market, or the buyer was forced to cancel the project, so that the buyer and its customers suffer serious losses and loss of material research, in addition to the seller to refund all previous the buyer to pay the purchase price, depending on the actual situation of the seller also bear the buyer direct and indirect economic losses.
4., if the seller is unable to resist force, including the war, fire, strike, and other force majeure caused by Chinese law, the buyer will allow the buyer to dismiss it. The Seller shall notify the buyer in written form within 24 hours after the occurrence of the force majeure, and the seller is obliged to take all necessary measures to deliver the goods as soon as possible. If the force majeure continues for more than 2 weeks, the buyer has the right to cancel this contract.
5. other unfinished matters: implemented in accordance with the economic contract law.
Eight. Dispute settlement
Any dispute arising from the execution of this contract shall be settled through friendly negotiation first. If no negotiation can be reached within 30 days, either party can submit the dispute to the municipal court.
The parties to this contract shall be strictly enforced. If one party fails to perform the contract in the cause of the contract, the party must ask for the consent of the other party two weeks in advance, and the contract shall be terminated.
The buyer: the seller: ____________ ____________
Representative: Representative: ___________ ____________
英文合同 篇6
NECESSARY TERMS OF ENGLISH CONTRACT
1.前言 Preamble
一份標準英文合同通常可以分為前言（Preamble）、正文（Operative part）、附錄（Schedule）及證明部分即結束詞（Attestation）四大部分組成。 前言（Preamble）由“Parties”及“Recitals”兩部分組成。
“Parties”為必備條款，在很多時候稱為“commencement”即合同的開場白，主要介紹合同各方的名稱或姓名、注冊地及地址、郵編及在合同中的簡稱。當然，并不是所有的合同都要詳細介紹以上諸要素，在許多簡單合同中，只是提一下各方的名稱。
I. 以下為“Parties”的常用表達方式：
1. This Agreement is entered into by and between ____ and ____. 本協議由以下雙方____和___ 簽署。
2. This Agreement is entered into by and between ____ (hereinafter referred to as____) and ____ (hereinafter referred to as "_____"), whereby it is agreed as follows:
本協議由以下雙方____（以下簡稱____）和_____（以下簡稱___）簽署，達成如下協議：
注：在很多合同中，這部分加入簽約事由，如：
This Agreement is entered into through friendly negotiations between _____ Co.
(hereinafter referred to as the “Party A”) and _____ Co. (hereinafter referred to as the “Party B”) based on equal
ity and mutual benefit to develop business on the terms and conditions set forth below:
本協議由_____（以下稱為甲方）和____（以下稱為乙方）為發展業務在平等互利的基礎上簽訂，其條款如下：
This Agreement is entered into between _____ (hereinafter referred to as "Company"), and ______, (hereinafter referred to as "Employee") pursuant to paragraph VIII(2) of the Employee Handbook, whereby it is agreed as follows:
本“協議”由_____（以下簡稱“公司”）與_____（以下簡稱“雇員”）根據“雇員手冊”第VIII(2)款簽署，“協議”內容如下：
II. 以下為標準的“Parties”條款：
3. This Agreement is made and entered into this _____th day of _____ in the year of ____ by and between ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at _____ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of _____, with its principal place of business at _____ (hereinafter referred to as “_____”), whereby it is agreed as follows:
本合約由______，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點在______（下稱_____），與_____，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點______（下稱代理人），于_____日簽訂和締結，協議如下：
III. “Recitals”由數個以"Whereas"字樣開頭的句子所組合而成（這些句子俗稱為“Whereas Clauses”），表示當事人乃是在基于對這些事實（例如訂約的目的、背景來由等）的共同認識，訂立此合約。
4. This Agreement is made and entered into this _____ day of _____ in the year of ____ by and between _______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred to as “_____”), and ______, a company duly organized and existing under and by virtue of the laws of ______, with its principal place of business at ______ (hereinafter referred
to as “_____”)
WITNESSED
WHEREAS, NOW THEREFORE, the parties hereto agree as follows:
本合約由_____，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點在______（下稱_____）（或下稱供應商），與_______，在_____法律之下并憑該等法律正式組織并存在的公司，其主要營業地點_
鑒于
因此，雙方當事人達成以下協議：
注：WITNESSED可以用WITHNESSTH、WITHNESSTH THAT等來代替。
IV. 在很多美國常用合同中，在很多情況下直接用RECITALS引導數個陳述語句或“Whereas Clauses”。下面為一個資產購買協議實例：
This ASSET PURCHASE AGREEMENT (the "Agreement") is made and entered into as of May 19, 1997 by and among AAA, a Delaware corporation ("AAA"), BBB, a Delaware corporation and wholly-owned subsidiary of AAA ("Buyer"), CCC ("Summit"), and DDD, an Oregon corporation and wholly-owned subsidiary of Summit ("Seller").
RECITALS
A. The Boards of Directors of each of Summit, Seller, AAA and Buyer believe it is in the best interests of each company and their respective security holders that Buyer acquire certain listed assets and assume certain listed liabilities of Seller (the "Acquisition").
B. On the date hereof, Buyer has executed a $2,000,000 irrevocable purchase order to purchase 400 time-based licenses for Summit's Visual HDL interfaces for Visual Test bench ("VTB") software on AAA's standard form of purchase order, which is payable within five (5) business days after the date hereof.
NOW, THEREFORE, in consideration of the covenants, promises and representations set forth herein, and for other good and valuable consideration, the parties agree as follows:
2.定義 Definition
在正文（Habendum）部分，通常第一章為定義（Definitions）部分。
定義條款即對合同中涉及的術語及名詞作出限定、解釋的條款。它可以散見于合同各個部分，但對于一些大型的、重要的合同，通常將其置于第一章。
I. 常見的定義語句常用mean, refer to, be construed as, include等來表達。如：
1. "Territory" means the United States of America.“銷售地區”是指美利堅合眾國。
2. “Commencement date” shall mean the date of signing this agreement by the last signing party hereto.
“協議生效日”是指本“協議”最后簽字的一方簽署本“協議”的日期。
3. The “agreement” herein referred to shall mean this agreement of agency by entrustment.
“協議”在這里是指本委托代理協議。
4. “Code” shall refer to the current and applicable Internal Revenue Code.
“法”是指當前可用的國內稅收法。
5. Reference to any statutory provision shall be construed as a reference to the same as it may have been, or may from time be, amended, modified or re-enacted.
引用法律規定理解為引用其本身外，還包括其修訂、修正或重新實施案。
6. "Expenses" include costs, charges and expenses of every description. “費用”包括各種形式的金錢支出。
II. 還有一類特殊的定義語句，即對于「單、復數」及「陰、陽性」名詞的范圍定義。通常都是用include來表達：
1. "Stock Certificate" includes "stock certificate" and "stock certificates".
合同中的“股票”，包括單數與復數。
2. "He" includes "he" and "she".
合同中的“他”，包括“他”與“她”。
3. Words using the singular or plural number also include the plural or singular number.
采用單數或復數的單詞也包括復數或單數。
III. 定義語句中，有時需限定范圍。而通常用得最多的是：“for the purpose of ”及“in relation to”某概念的定義條款，如果適用范圍僅限于合同的“特定部份”，可以用“for the purpose of ”來為定義條款起頭。而如果定義條款是針對合同的“特定概念”，就用“in relation to”來界定。如下例：
1. For the purpose of this Agreement, "Products" means all types of the machineries manufactured by Manufacturer as are specified in Attachment
A hereto.
本協議所稱的“產品”，指制造人所制造如附件A表列之各式機器。
2. "Address" means－
(a) 就自然人而言in relation to an individual, his usual residential or business address; and
(b) in relation to a corporation, its registered or principal office in the Republic of China.
“地址”就自然人而言，指通常之居所或工作場所；就公司而言，指位于中華人民共和國之注冊所在地或主營業所。
IV. 在定義條款中，在定義語句前有時會加上一些陳述語句來引導，如：
英文合同 篇7
合 同 CONTRACT
日期： 合同號碼：
Date： Contract No.：
買 方： （The Buyers） 賣方： （The Sellers）
茲經買賣雙方同意按照以下條款由買方購進，賣方售出以下商品：
This contract is made by and between the Buyers and the Sellers； whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter：
（1） 商品名稱：
Name of Commodity：
（2） 數 量：
Quantity：
（3） 單 價：
Unit price：
（4） 總 值：
Total Value：
（5） 包 裝：
Packing：
（6） 生產國別：
Country of Origin ：
（7） 支付條款：
Terms of Payment：
（8） 保 險：
insurance：
（9） 裝運期限：
Time of Shipment：
（10） 起 運 港：
Port of Lading：
（11） 目 的 港：
Port of Destination：
（12）索賠：在貨到目的口岸45天內如發現貨物品質，規格和數量與合同不附，除屬保險公司或船方
責任外，買方有權憑中國商檢出具的檢驗證書或有關文件向賣方索賠換貨或賠款。
Claims：
Within 45 days after the arrival of the goods at the destination， should the quality， Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable， the Buyers shall， have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers
（13）不可抗力：由于人力不可抗力的原由發生在制造，裝載或運輸的過程中導致賣方延期交貨或不
能交貨者，賣方可免除責任，在不可抗力發生后，賣方須立即電告買方及在14天內以
空郵方式向買方提供事故發生的證明文件，在上述情況下，賣方仍須負責采取措施盡
快發貨。
Force Majeure ：
The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure， which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after . the Sellers shall send by airmail to the Buyers for their acceptancea certificate of the accident. Under such circumstances the Sellers， however， are still under the obligation to take all necessary measures to hasten the deliveryof the goods.
（14）仲裁：凡有關執行合同所發生的一切爭議應通過友好協商解決，如協商不能解決，則將分歧提
交中國國際貿易促進委員會按有關仲裁程序進行仲裁，仲裁將是終局的，雙方均受其約
束，仲裁費用由敗訴方承擔。
Arbitration ：
All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. in case no settlement can be reached， the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission . the Arbitration committee shall be final and binding upon both parties. and the Arbitration fee shall be borne by the losing parties.
買方： 賣方：
（授權簽字） （授權簽字）
英文合同 篇8
供方：Supplier:
需方： Demander:
簽訂日期：Date of Signature:
供方向需方提供______ 類產品(具體產品名稱、編號、規格及單價等詳見報價單)，供需雙方本著平等互利、協商一致的原則，簽訂本合同，以資雙方信守執行，
Under the principle of mutual equality and benefit, the Supplier is to provide Demander with ______products (refers to the price quotation sheet for the name, code, specification and price of the products). Both parties agree to enter into this contract for execution.
一、合同定義： Definitions:
1、 采購合同：是指包括本合同以及依據本合同所簽訂生效的相關訂單、合同附件和補充規定，以及雙方不時簽署或確認的工程、計劃、規格變更通知等在內的全部書面文件。
Procurement Contract means all written documents, including this contract and the relevant order entered into and validated under this contract, attached files and supplementary regulations to this contract, and such notices as modifications to project, schedule and specification signed and confirmed by both parties from time to time.
2、 價格：指由雙方協商確定的產品價格，以雙方簽字生效的報價單為準。
Price means the price of the products on the price quotation sheet validated and signed by both parities.
3、 產品：指在生效采購合同、訂單、報價單或雙方簽署的規格，質量，維修條款/協議中所列的由供方提供給需方的產品和/或服務，在本合同中，產品與服務統稱為產品。
Product means any products and/or services the Supplier provide to the Demander under the effective procurement contract, order, price quotation sheet or specification, quality and maintenance terms and conditions / agreements signed by both parties, and refer to both the products and services in this contract.
4、 生效訂單：指需方發給供方并經供方依照雙方約定或需方要求的方式在相應時間內進行確認后的，包含產品型號、數量、價格、交貨條款、支付條款等內容的正式訂貨通知，是授權供方按照本合同履行交貨義務的文件。
Effective Order means an formal order-placing notice containing such content as model, quantity, price, delivery conditions and payment conditions of the products, delivered from the Demander to the Supplier and confirmed within the corresponding time, by the means agreed upon by both parties or the means requested by the Demander, which is a document authorizing the Supplier to exercise its responsibility to deliver the products under this contract.
5、 需方商標：指需方擁有的“TCL”、“TCL-legrand”、“LEGRAND”或以上文字或圖形的任意組合以及需方目前擁有的或現在正在申請的、或將來所有的其他商標或其它標識。
Demander’s Trademark means any name or sign containing either TCL, or TCL International Electrical, or Legrand or any combination of the foregoing which is currently owned by the Demander and application is being lodged or will be lodged for trademark or logo.
6、 產品支持文件：是指任何產品說明書、圖紙、電路圖、用戶手冊、市場推廣材料、合格證及其他類似的文件資料。
Product Supporting Document means instruction, drawing, circuit diagram, user’s manual, marketing materials, quality certificate and any other similar document information for any products.
二、 采購合同效力： Effect of Procurement Contract::
1、 本合同的條款和條件均適用于依據本合同所制定生效的附則、訂單、報價單及補充協議、相關修訂書。供方和需方將就需方依據本合同采購的不同產品的價格、技術規定、品質標準及維修服務另行簽訂附則，作為本合同的補充。
The terms and conditionns under this contract are applicable to supplementary articles, order, price quotation sheet and supplementary agreement and their relevant revisions entered into and validated under this contract. Supplementary articles concerning price, technical specification, quality standard and maintenance service for various products shall be entered into by the Supplier and Demander in accordance with this contract, which shall act as the supplement to this contract.
2、 本合同的簽署并不表明需方有義務購買供方的產品，本合同也不限制需方向其他貨源采購與供方所提供產品相同或類似的產品。需方采購供方產品的義務僅在生效訂單下才對需方有法律約束力。
The signature of this contract does not imply that the Demander is liable for purchasing products from the Supplier, nor restricts the Demander to purchase the products identical or similar to the Supplier’s from sources other than the Supplier. The Demander is only legally bound upon placement of effective order for products from the Supplier.
三、價格及付款：Price and Payment:
1、 需方向供方提供產品報價單格式。供方在雙方約定或需方要求的期限內，根據需方所提供的報價單格式填寫相應內容并交需方確認(如無另行約定，供方應自收到需方報價單格式之日起三個工作日內將相應內容交需方進行確認)。經需方書面接受的報價單上之價格為正式生效的產品報價，雙方應全面履行。經雙方確認并生效的幾份或數份報價單之間，以最后生效的報價單所載的內容為當前階段(報價和期間)為生效執行的產品價格(和期間)。對于需方要求提供的成本結構清單，供方需要在報價單的同時按照需方要求格式附帶提供相應文檔。
The Demander shall provide a price quotation form format to the Supplier. The Supplier shall fill in the price quotation form and send it back to the Demander for confirmation within a period of time agreed upon by both parties or requested by the Demander (unleotherwise agreed upon, the Supplier shall fill in the form and send it back to the Demander with three (3) working days after receipt of the price quotation form format from the Demander). The price on the price quotation sheet accepted by the Demander in writing represents the formally validated product price and shall be complied with by both parties. The content specified in the price quotation form last validated represents the current product price and shall be executed by both parties when a number of price quotation forms have been confirmed and validated in between. The relevant document containing Cost Structure demanded by the Demander shall be provided in the form as required by the Demander.
2、 供方對需方的報價必須遵循誠信的原則，供方不得采取向研發/工程部門報以低價，而向采購部門報以高價等不誠信行為;一旦發生類似情況，需方有權終止本合同并保留向供方索賠的權利。
The Supplier shall provide the price quotation to the Demander on principle of honesty. Upon discovery of such dishonest activities as the Supplier quoting a lower price to research and development department while quoting a higher price to procurement department, the Demander reserve the right to terminate this contract and reserve all rights to claim against the Supplier.
3、 合同產品經需方檢驗合格入庫后，電匯____ 天 或 承兌____ 天(如應供方要求,需方提前支付貨款,則供方需承擔對應期間的資金利息,雙方約定計息標準為年利率6%)。
After the products specified in contract are inspected and checked in the warehouse by the Demander, Demander should execute the payment by T/T (telegraphic transfer) on ____ days or acceptance bill on ____ days (if advance payment is made by the Demander as requested by the Supplier, the interest incurred from the advance payment during the corresponding period is payable by the Supplier at the annual interest rate of 6% as agreed upon by both parties).
4、在合同有效期內，如果單價高于當時市場價的3%，需方有權在任何時間重新審核確認單價。
Demander reserves the right to review the price at any time during the contract in case find that it is above the market price by more than 3% .
四、訂單：Purchase Order:
1、 需方給供方下達網上訂貨單(若無共享網絡資源的需下達書面訂單)，應在訂貨單中明確交貨日期及每次的交貨數量，并通知供方;供方應遵守訂貨單所載內容交貨，除非雙方事先以書面形式同意變更訂貨單的約定內容外，供方的交貨不得與訂單的約定內容有異。
The Demander shall specify the quantity of products to be delivered each time and the delivery date on the online purchase order (purchase order in writing shall be made if the Demander has no acceto internet) and notify the Supplier. The Supplier shall deliver the products as specified on the purchase order. The delivered products by the Supplier shall not be inconsistent with the purchase order, unleprior consent is made by both parties in writing.
2、 供方接到訂貨單后，如是正常訂貨，供方應于接到訂單兩日(需方的工作日)以內，如是緊急訂貨應于接到訂單一日(需方的工作日)以內，以書面傳真回復需方進行確認;如超出期限無供方的回復，即表示供方同意需方訂貨單所載的交貨要求。供應商確認的交貨周期不得超過本協議附件中規定的各項時間期限。
The Supplier shall reply to the Demander in writing by way of Fax for confirmation within two (2) working days (demander’s working day) after receipt of the normal purchase order or within one (1) working days (demander’s working day) after receipt of the emergency purchase order. If no reply is made by the Supplier within such foregoing period, the Supplier is deemed to have agreed the product delivery requirement specified on the purchase order. The delivery time which the supply confirmed can’t exceed the time on the attached files agreed by both parties.
3、 由于市場變化或其他不可預測因素導致需方對產品需求發生變化時，需方可變更或中止相關生效訂單，需方應盡快通知供方，具體相關事宜由雙方另行協商確定，并形成書面文件。
The Demander may change or terminate the relevant effective purchase order in case that the demand of the products is changed due to the change of the market or other unpredictable factors. The Demander shall notify the Supplier of such change or termination of the relevant effective purchase order in a timely manner. Details arrangement shall be agreed upon by both parties and developed into a written document.
五、交貨和包裝： Delivery and Packaging:
1、 交貨：Delivery:
1.1 除非雙方另有約定，本合同的交貨是指由供方或供方委托的人員或機構將產品交到需方倉庫，與需方倉庫責任人辦理交貨手續，并同時提供有關產品的單證和資料，并承擔相應費用(包括但不限于運輸、保險及卸貨的費用)。
Unleotherwise agreed upon by both parties, delivery under this contract means that the Supplier, or the personnel or institution authorized by the Supplier deliver and turn over the products to the responsible person of the Demander’s warehouse, with provision of relevant certificate and information of the products concerned, and bear the relevant cost (including but not restricted to transport, insurance and unloading cost).
1.2 供方必須滿足經(雙方)確認的生效訂單中交貨期的要求，按時交貨。當需方要求提前交貨時，應通知供方，供方應采取適當的措施，努力滿足交貨要求;若確實無法滿足，應于收到需方通知之日起一個工作日內，以書面形式向需方告知最早的交貨時間和數量。
The Supplier shall deliver the products on time as specified on the effective purchase order confirmed by the both parties. If the Demander needs an advance delivery, the Demander shall notify the Supplier who shall endeavor to satisfy such request by taking appropriate actions, or shall notify the Demander in writing of the earliest possible delivery time and quantity within one (1) working day after receipt of the notice from the Demander.
1.3 除非需方要求或同意，供方的交貨時間不得提前，否則視為不按時交貨，需方有權拒收。
The Supplier shall not deliver the products ahead of the schedule, unledemanded or consented by the Demander. Delivering the products ahead of the schedule is deemed to be Supplier’s failure to make the delivery on time, and the Demander reserve the right to refuse to accept such product.
1.4 因供方原因遲延交貨，導致需方不能向第三人緊急出貨時，需方有權向其它方采購，并且由此產生的費用由供方承擔;且如因此導致需方遭受損失時，供方需賠償其損失;若因不可抗力的天然災害所導致的交貨延遲，則供方不須賠償或負擔其費用。
The Demander reserve the right to procure the products from other sources under the circumstance that the Demander fails to make the emergency delivery of the products to the third party due to the delayed delivery of the products from the Supplier who is responsible for any cost incurred from the procurement from other sources. The Supplier shall compensate the Demander for any loincurred from the delayed delivery of the products which is due to any causes other than force majeure including natural disaster.
1.5 如應需方的要求必須更改訂單所記載的訂單內容，應由雙方協商后，形成書面文件。
Any changes to the content of the purchase order as requested by the Demander shall be agreed upon by both parties and developed into a written document.
2、 包裝：Packaging:
2.1 除非另有規定，包裝物應由供方提供并自負費用，包裝物上的裝運標志必須符合需方要求。
Unleotherwise specified, the Supplier shall provide and pay for the packaging materials, and the packing logo on the package shall be compliant with the requirement of the Demander.
2.2 供方應保證所提供的包裝物符合運輸、產品安全的要求;供方應采用合適的安全措施，妥善包裝貨物，達到防潮、防濕、防震、防塵等要求;雙方對包裝方式另有約定的，應遵守雙方約定;因包裝不符合規定造成產品損壞、滅失或其他損失的責任由供方承擔。
The Supplier shall ensure the packaging materials provided comply with the requirement for transport and safety of the products, and shall take all appropriate precautious measures against damp, humidity, vibration and dust. The products shall be packed by the means agreed upon by both parties. The Supplier shall be liable for any damages, losses from the products or any other losses arising from non-compliance with packaging specification.
六、收貨及檢驗： Acceptance and Inspection:
1、 雙方應按照約定交貨方式進行交貨;需方應于供方產品送達約定地點后清點合同產品，核對產品數量、名稱、包裝等，并辦理收貨確認手續。
The products shall be delivered to the Demander by the means agreed upon by both parties. The demander shall check for the quantity, name and package of the products as specified on the purchase order for takeover confirmation at the delivery destination agreed upon by both parties.
2、 產品驗收按照雙方確認的樣品、圖紙、《檢驗標準書》、《檢驗規格書》進行。未約定的驗收內容有國家或行業標準的，應符合相關標準;無標準的以滿足需方實際需求為準。
The products shall be accepted in accordance with such acceptance criteria as product sample, the diagram, Inspection Criteria, Inspection Specification agreed upon by both parties, or in accordance with national standard or industry standard if no acceptance criteria is provided, or in accordance with the actual need of the Demander if no standard is available
3、 產品驗收合格不表示產品質量合格，
合同范本
《購銷合同英文范本》。若供方產品在需方生產或消費使用過程中，因產品出現嚴重質量問題或存在缺陷而造成需方的直接及間接損失均由供方承擔。
The accepted products do not mean quality passed. The Supplier shall be liable for any direct and indirect losustained by the Demander arising from serious quality problems or defects of the products found in the course of using or consuming the products supplied by the Supplier.
七、品質保證： Quality Assurance:
1、 除非另有約定，供方交付的產品應符合：①本合同“陳述和保證”及本條款等規定的內容;②經雙方確認的產品技術規格，檢驗標準以及雙方不時簽發和確認生效的相關修訂書，工程、計劃、規格變更通知等文件總規定的標準;③生效訂單中規定的標準，以及封樣樣品表示的標準。上述標準之間如有沖突，則按照最新確認的標準執行，無法確定標準確認時間的，按照較高標準執行。
Unleotherwise specified, the products delivered by the Supplier shall be in compliance with:①‘Representation and Warranty’ and the terms and conditions under this contract; ② product technical specification, inspection standard and their relevant revisions, and the criteria contained in notice of project, schedule and specification modification issued and confirmed by both parties from time to time; ③ criteria as specified on the effective order and as shown in the product sample. Should there be any conflicts among the criteria mentioned above, the criteria last confirmed, or the higher standard shall be executed if the time for the criteria confirmation fails to be identified.
2、 根據需方QA部的要求，供方應當配合《品質保證協議》的簽署工作，進行積極協調并達成雙方都能接受的共識，促成雙方成功簽署《品質保證協議》;雙方都有認真履行《品質保證協議》的義務。
The Supplier shall proactively cooperate with the Demander’s QA department to facilitate the signature of Quality Assurance Agreement and the generation of consensus acceptable to both parties. Both parties are liable for earnestly executing the Quality Assurance Agreement.
3、 雙方將來可對上述內容規定做更明確的補充規定，但該補充規定的標準高于上述規定的或有更具體的標準的，按補充規定執行;低于上述規定的標準的，按上述規定的標準執行。
Both parties may enter into more specific regulations supplemented to the regulations above. The supplement shall be executed if the criteria contained are higher than those of foregoing, or more specific criteria are provided. But the regulations above shall be executed if the criteria contained in the supplement are lower than those of the foregoing.
八、陳述和保證：Representation and Warranty:
1、 供方對其提供的產品享有合法的所有權，同時沒有索賠、扣押、抵押或其他行為存在或威脅到供方，以致妨礙到需方對產品使用和銷售。
The Supplier is entitled to the ownership of the products provided and there is no existence of any claim, impoundment, mortgage or any other threatened actions against the Supplier, which may lead to prevent the Demander from using and selling the products.
2、 對本合同的執行不會違反與其相關的任何合同條款、責任、法律、法規和法令，產品符合產品生產、儲存、銷售的強制性法律、法規規定的標準。
The execution of this contract shall not violate any related terms, responsibility, laws, regulations and decrees, and any applicable mandatory laws, regulations concerning product manufacture, storage and sale.
3、 產品是原廠新的且不包含任何用過的或修過的部件，并正常進口。
The products shall be newly-manufactured from the original manufacturer exclusive of any used or repaired components, and shall be imported through normal procedure
4、 供方產品及其產品支持文件不侵犯任何第三方的知識產權，需方不會因使用、銷售產品或產品的任何部分侵害任何第三方的知識產權。
The product and its supporting documents provided by the Supplier shall not infringe the intellectual property rights of any third party. Under no circumstance should the Demander be liable for infringement of intellectual property rights of any third party by using, selling the products in whole or in parts.
5、 遵守本合同“價格條款”的有關規定，不進行欺詐性報價。
The Pricing Terms under this contract shall be abided by and no fraudulent price quotation is allowed.
6、 由需方提供給供方用于為需方進行產品制作的物料，僅限于為需方進行生產;供方需提供固定的、安全的倉庫進行儲存，在其使用前，供方應對該物料的性能、數量、品質等負責，如必要，需承擔相關保險的費用。
The manufacturing materials provided from the Demander to the Supplier shall be only used for manufacturing the products. The Supplier shall provide a robust and safe warehouse to store such materials and shall be responsible for the performance, quantity and quality of such materials before the usage, and shall be liable for any cost in association with the insurance if necessary.
7、 關于貨品制造上必須使用的模具;
The mold which has to be used for the product manufacturing:
雙方需制定模具采購/保養合同，該合同中應包含關于模具價格、付款、所有權、保管、保密、技術協議等內容，雙方均需按照此模具采購合同執行。
Mold Procurement and Maintenance Agreement, which contains such content as price, payment, ownership, storage, confidentiality and technology agreements shall be entered into and executed by both parties.
8、 知識產權：Intellectual Property Rights:
8.1 使用許可：除非另有約定，供方向需方提供的本合同涉及的產品并不視為該產品所含有的供方擁有或控制的任何知識產權的轉讓;但對于需方在加工、組裝、使用或銷售產品時必須擁有知識產權許可的產品，供方依據本合同有權并已經向需方授予了該知識產權的符合本合同目的的使用許可。
Usage License: the provision of the products from the Supplier to the Demander under this contract is not deemed to transfer any intellectual property rights contained in the products which is owned or controlled by the Supplier, unleotherwise agreed upon. The Supplier reserve the right to grant and has granted the Demander the Usage License for processing, assembling, using or selling the products which are intellectual property rights license required, in line with the objective of this contract.
8.2 需方提供的部件：如果需方提供部件供供方使用以履行本合同，則供方只能將需方提供的部件用于此目的。
Under the circumstance that the Demander should provide a component to the Supplier for the purpose of executing the contract, the Supplier shall only use such component provided by the Demander for such purpose.
8.3 在本合同項下需方提供的任何技術、設計及功能需求，其知識產權和財產權歸需方所有，此類技術、涉及或功能僅限于按需方要求移植到合同產品上去。
The intellectual property rights and property rights of any technology, design and functionality provided by the Demander under this contract belong to the Demander and such technology and involving functions shall only be transplanted onto the products as specified on the contract
9、 保密：Confidentiality:
9.1除了那些供方可從公開渠道或以正當途徑從第三方獲得的信息外，供方對任何從需方得到的與本合同相關的保密信息或需方經營/技術方面的信息，以及需方在交易談判過程中提供的有關涉及商業秘密的信息，供方在任何時候，即使在本合同終止后，也不得透露給任何人。當需方有要求時，供方應將包含這些信息的所有文件和材料退還需方。
Any confidential information acquired from the Demander or from this contract, or relevant to Demander’s busineand technology, and any information involving commercial confidentiality provided by the Demander in the course of negotiation shall never be disclosed by the Supplier to any other person even after the termination of this contract, except for those information which is available in public or formally acquired from the third party. The Supplier shall return all documents and materials containing such information to the Demander, upon request by the Demander.
9.2如根據政府法令或法律程序要求任何一方必須向政府、裁判機構或任何第三防提供上述資料，可按規定提供，但應盡快將此項事實通知對方。
Either party shall notify the other party in a timely manner of the fact that such information mentioned above has been disclosed to the government, supervisory institution or any third party as demanded by the government regulations or laws.
9.3 本合同任何變更、解除或終止均不影響本條款的效力。
The effectiveneof this term shall not be affected by modification, termination or expiration of this contract.
九、違約責任： Liabilities for Breach of Contract:
1、 供方未按照生效訂單要求的時間交付產品，應承擔逾期交貨違約責任，即每逾期一天，供方應支付訂單總金額的1%作為違約金。逾期十日仍未交付，需方有權解除該訂單的約束力，供方應承擔不能交貨的違約責任，即支付訂單總額一倍的違約金;
Should the Supplier fail to deliver the products by the time as required on the effective order, the Supplier shall be liable for the penalty arising from overdue delivery, namely by paying a penalty of 1% of the sum of payable on the order for every overdue day. Should the delivery is overdue for ten (10) days, the Demander reserve the right to discharge the binding force of the order and shall be liable for the penalty arising from failure to make the delivery, namely by paying a penalty of double that of the sum on the order.
2、 供方應交付驗收合格的產品，否則需方有權退貨，供方應在5日內重新送貨驗收，并承擔逾期交貨的違約責任。若再次驗收不合格，需方有權解除該次訂單，供方應承擔不能交貨的違約責任，即支付訂單總額一倍的違約金。
The Demander reserve the right to reject any products failed to be accepted by the Demander, and the Supplier shall re-deliver the products replacing those rejected within five (5) working days and be liable for the penalty arising from the overdue delivery. Should the products delivered for the second time fail to be accepted again, the Demander reserve the right to terminate such order and the Supplier is liable for the penalty arising from failure to make delivery, namely by paying a penalty of double that of the sum on the order.
3、 供方未按照訂單要求的數量交付產品，應在3日內補齊，并承擔相應的逾期交貨違約責任。
Should the products as specified on the order fail to be delivered in whole, the Supplier shall replenish the undelivered products within three (3) days and be liable for the penalty arising from the overdue delivery.
4、 需方應按約定付款，否則應承擔逾期付款的違約責任，即每逾期一天應支付未付貨款總額的萬分之五作為違約金。
The Demander shall make the payment agreed upon or otherwise be liable for the penalty arising from the overdue delivery, namely by paying a penalty 5 of the sum of outstanding payment for each overdue day.
5、 如需方確認為免檢產品的，由供方出具相關技術資料或品質保證書作為合同附件，若因供方所供產品質量問題給需方帶來一切損失均由(供)方承擔。
Should the products be deemed to be inspection-free by the Demander, the Supplier shall provide all relevant technical information or quality assurance certificate as the attachment to the contract. The Supplier shall be liable for any losustained by the Demander arising from the quality problems of the products provided by the Supplier.
6、 本合同約定的違約金，作為違約的損失賠償。如約定違約金數額低于實際損失，以實際損失為準進行賠償。損失賠償包括合同履行后可以獲得的利益，但不得超過違反合同一方訂立合同時應當預見到的因違反合同可能造成的損失。
The penalty agreed upon under this contract is deemed to be the compensation for breach of contract. Should the agreed penalty be lower than the actual loss, the actual loshall be compensated. Locompensation may be inclusive of the attained benefit after execution of the contract, but shall not exceed the lopossibly incurred from breach of contract which should be foreseen in the time of entering into the contract by the violating party.
十、合同解除：Termination of Contract:
1、本合同任何一方均有權于另一方發生下列情形時解除本合同：
Either party of the contract reserves the right to terminate this contract upon realization of any following circumstances:
1.1 一方遲延履行合同義務，導致另一方的合同目的不能實現的，或者一方遲延履行合同義務，經另一方催告后十天內仍不履行的。
Either party delays exercising its obligation under this contract, which causes the other party’s failure to realize the objective of the contract, or either party still fails to exercise its obligation within ten (10) days after being urged by the other party.
1.2 另一方已經提出破產申請或被他人提出破產申請，或進入其他類似的法律程序的。
Application for bankruptcy has been lodged by the other party or any other party, or similar legal procedure has been underway.
1.3 另一方經營狀況嚴重惡化。The busineof the other party is deteriorating.
1.4 另一方有轉移財產、抽逃資金、逃避債務的行為。
The other party is found to be transferring its property, removing its capital or evading its liabilities.
1.5 當供方因各種原因要終止供貨協議時，需提前3個月書面通知需方，需方根據需要，可以要求供方提供需方3個月的用量。如拒絕生產，則供方需向需方賠償半年的供貨金額。
The supplier should inform demander in advance of 3 months in written when decides to end supplying agreement, and should supply the quantity of the components for demand’s 3 months’ consumption if demand require. If supplier refuses to supply, then supplier should pay a penalty of semi-year’s transaction amount.
2、本合同因任何原因終止或解除后，雙方在本合同及其附屬文件項下的權利義務立即終止，但本合同及其附屬文件項下售后服務條款、保證條款、違約責任條款、爭議解決方式條款、知識產權條款及保密條款、以及其他依其性質應當繼續有效的條款仍然有效。解除協議并不影響任何一方對因另一方違約或侵權行為造成的損失進行索賠的權利。
The rights and obligations of both parties under this contract and its associating document shall be terminated immediately upon termination or discharge of this contract for any reasons, but any terms concerning After-sale Service, Guarantee, Breach of Contract, Dispute Solution, Intellectual Property Rights, Confidentiality under this contract or its associating document, and any other terms which should remain effective in nature, shall remain in effect. Discharge of contract shall not affect either party to claim against the other party for any loarising from its breach of contract or infringement of copyrights.
十一、 一般條款：Generality:
1、 本合同的有效期間以雙方簽訂日期為準。
The effective period for this contract is the period entered into by both parties.
2、 未經需方蓋章確認或特別授權，需方的采購、技術等人員無權對合同的價格、數量、交期、違約責任、驗收等實質內容進行書面或口頭承諾;本合同的委托代理人僅具有簽署本合同的權利，不作其它授權理解。
Procurement or technical personnel from the Demander has no rights to make any written or oral warranties on the actual content of the price, quantity, delivery date, liabilities for breach of contract, acceptance under this contract, unleconfirmed with stamp or specially authorized by the Demander. The assigned representative under this contract is only authorized to sign this contract, with no any other authorization.
3、 只有在得到需方書面同意時，供方可以使用需方商標。
The Supplier is not allowed to use the Demander’s trademark, unleconsent in writing by the Demander is attained.
4、 因履行本合同發生異議，由雙方當事人協商解決;協商不成的，應以向需方住所地人民法院提起訴訟的方式解決。
Any disputes in the execution of the contract should be negotiated between both Parties. If the Parties cannot resolve the dispute by negotiation, the matter should be submitted to the People’s Court of the Demander’s resident jurisdiction for legal actions.
5、 本合同一式四份，由雙方簽名蓋章后生效，其中供方一份，需方三份。
This contract is in quadruplicate and only validated after signature is made by both parties, with the Supplier in possession of one copy and the Demander in possession of the other three copies.
供 方Supplier： 需 方Demander：
Signature: Signature:
簽名： 簽名：
Stamp: Stamp:
蓋章： 蓋章：
Date: Date:
日期： 日期：
英文合同 篇9
GARMENTS PURCHASE CONTRACT
Contract NO.合同編號：
Date簽約日期：
Buyer: 買方：
Seller: 賣方：
This purchase contract (hereafter abbreviated “contract”) is signed by and between the Buyer and the Seller upon equal negotiations based on the Contract Law and other relevant laws and regulations. Both parties agree to sell and buy goods on following terms and conditions.
此銷售合同（以下簡稱“合同”）根據合同法及相關法律法規并經由買賣雙方經平等協商后共同簽定，買方與賣方均同意以下條款和條件購買和出售貨物。
Purchasing Contract terms and conditions of garments Season: 服裝采購合同條款：
1. Description, quantity, unit price, total amount and other details of the goods ordered please refer to detail order, invoice and packing list. The name of the issuing company of invoice must be the same as the seller.
采購品名、規格、數量、單價、總價、交期等參考每次采購相應訂單、發票及裝運單，發票的填開單位必須與本合同中賣方的名稱相一致。
2. Country of origin: China原產地：中國
3. Delivery: The seller shall deliver the goods to the warehouse as previously agreed between the two parties.
交貨方式：賣方應把貨物送交至雙方事先約定的倉庫。
4. The quality of all the garments shall answer for the updated, valid Standard of the Nation and the industry. In case the garments are unqualified or for other reason that shall ascribe the seller’s fault, which brings losses of or damages (including but
not limited to fine, expropriate, damage to Goodwill, lawyer’s fee and other losses for the buyer ’s breach of law or contract because of the seller fault) to the buyer, the buyer shall has the right to ask seller for damages.
所有服裝質量應符合最新、有效的國家標準、行業標準的規定，若賣方交付的服裝質量不合格或其他任何可歸咎于賣方的責任導致買方遭受的任何損失（包括但不限于罰沒款、扣款、商譽損失、律師費及其他因賣方原因導致買方違約、違法所遭受的損失），買方有權要求賣方承擔。
5. Seller shall provide 7 original copies of "Approved" Quality Inspection Certificate for each fabric used to produce MOTIVI different models 7 days before the delivery date. The certificate must be issued by a Chinese official quality testing department, the samples that the seller send to quality test lab shall be representative, can represent the quality of the goods, and the test must follow the Basic Standard GB18401 and include the composition of the fabric. The buyer will settle the payment according to the contract after received the test report and other related documentations (Packing list, Invoice of Goods etc.).
賣方應于交貨日七日前向買方提供由中國官方質檢部門認可的質檢機構出具的所有用來制作服裝的面料的合格質檢報告原件7 份，賣方向質檢機構送檢的樣品應具有代表性，能夠代表大貨質量，質檢報告應包含纖維含量及國家標準 GB18401 的安全技術要求事項。買方在收到質檢報告、裝箱單、貨物發票等其他文件后按合同約定付款。
6. For all the goods, the seller shall issue invoice to the buyer, the invoice shall be invoiced 所有貨物應由賣方向買方開具發票，發票抬頭需開列買方單位名稱為
Kind of invoice issued: People’s Republic of China VAT invoice
發票開立種類：中華人民共和國增值稅專用發票。
7. Terms of Payment: Total amount of payment of goods shall be paid in RMB within 30 days issued the invoices.
付款： 開立發票后30日內以人民幣支付。
Upon signing the contract, the seller shall provide bank information for the buyer to effect payment.
買賣雙方簽定訂購合同后，賣方需提供公司銀行資料給予買方支付貨款.。
8. Intellectual Property Right 知識產權
All the goods, documents and materials that the Seller gets to may concerns secret and shall procure that its employee, agent and any other persons who may have access to the above-mentioned information keep confidentiality and shall not use it for any purpose at any time or disclose to any third party. The seller shall not sell, transfer any products or materials to any third party except for the buyer products, substandard products, rest products and unused/waste products or materials. In case the seller breaches, the buyer has the right to ask for
indemnification including but not limited investigation fees, lawyer’s fees，
compensation as well as all other fees according to the stipulations or Chinese laws. 賣方接觸到的買方及集團的物品、文件資料均可能涉及買方及其關聯公司的知識產權，尤其是可能包含的買方商標、集團的其他商標，著作權及商業秘密。賣方應對其知悉的買方及其關聯公司的商業秘密進行保密，并應促使賣方所有接觸到買方秘密信息的任何雇員、代理人、客戶或其他人士對該信息保密，不得在任何時候為任何目的使用或者向任何第三人披露。賣方不得向除買方及集團以外的任何單位和個人銷售、轉讓涉及買方及米羅利奧集團的商標、標識標記、著作權等知識產權的產品或資料，即使對于過季品、等外品、富余品和廢棄不用的產品或資料也不例外。若賣方違反約定，買方有權根據約定及中國法律規定要求賣方承擔包括但不限于調查費、律師費、賠償金在內的一切賠償責任。
9. Both parties will try to resolve any dispute concerning the contract amicably. If the dispute can not be resolved by negotiation, any party may initial legal action.
買賣雙方在履行本合同時如有爭議應先以友好協商方式解決,如協商不成買賣雙方可將爭議送交由提出訴訟方所在地之法院進行訴訟.
10. All appendixes to this contract should be bonded to the contract as a whole.
英文合同 篇10
Purchase Contract
合同編號(Contract No.): _______________
簽訂日期(Date) :＿＿＿＿＿＿＿＿＿＿_
簽訂地點(Signed at) :＿＿＿＿＿＿＿____
買方The Buyer:＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
地址Address: ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 電話(Tel):___＿＿＿＿＿＿＿＿
傳真(Fax):＿＿＿＿＿＿＿＿＿＿
電子郵箱(E-mail):＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
賣方The Seller:＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 地址Address: ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿_＿ 電話(Tel):_＿＿＿＿＿＿＿＿
傳真(Fax):＿＿＿＿＿＿＿＿＿＿＿
電子郵箱(E-mail):＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
買賣雙方同意按照下列條款簽訂本合同The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below:
1. 貨物名稱、規格和質量（Name, Specifications and Quality of Commodity）：
2. 數量（Quantity）：
允許＿＿＿＿的溢短裝（＿＿＿% more or less allowed）
3. 單價（Unit Price）：
4. 總值（Total Amount）：
5. 交貨條件(Terms of Delivery) FOB/CFR/CIF＿＿＿＿＿＿＿
6. 原產地國與制造商 (Country of Origin and Manufacturers):
7. 包裝及標準（Packing）：
貨物應具有防潮、防銹蝕、防震并適合于遠洋運輸的包裝，由于貨物包裝不良而造成的貨物殘損、滅失應由賣方負責。賣方應在每個包裝箱上用不褪色的顏色標明尺碼、包裝箱號碼、毛重、凈重及“此端向上”、“防潮”、“小心輕放”等標記。
The packing of the goods shall be preventive from dampness, rust, moisture, erosion and shock, and shall be suitable for ocean transportation/ multiple transportation. The Seller shall be liable for any damage and loss of the goods attributable to the inadequate or improper packing. The measurement, gross weight, net weight and the cautions such as "Do not stack up side down", "Keep away from moisture", "Handle with care" shall be stenciled on the surface of each package with fadeless pigment.
8. 嘜頭（Shipping Marks）：
9. 裝運期限（Time of Shipment）：
10. 裝運口岸（Port of Loading）：
11. 目的口岸（Port of Destination）：
12. 保險（Insurance）：
由＿＿＿＿按發票金額110%投保＿＿＿＿＿險和＿＿＿＿＿附加險。
Insurance shall be covered by the ________ for 110% of the invoice value against _______ Risks and __________ Additional Risks.
13. 付款條件（Terms of Payment）：
信用證方式：買方應在裝運期前/合同生效后＿＿日，開出以賣方為受益人的不可撤銷的議付信用證，信用證在裝船完畢后＿＿日內到期。
Letter of Credit: The Buyer shall, ______ days prior to the time of shipment /after this Contract comes into effect, open an irrevocable Letter of Credit in favor of the Seller. The Letter of Credit shall expire ____ days after the completion of loading of the shipment as stipulated.
(2) 付款交單：貨物發運后，賣方出具以買方為付款人的付款跟單匯票，按即期付款交單（D/P）方式，通過賣方銀行及＿＿＿＿＿銀行向買方轉交單證，換取貨物。
Documents against payment: After shipment, the Seller shall draw a sight bill of exchange on the Buyer and deliver the documents through Sellers bank and ______ Bank to the Buyer against payment, i.e D/P. The Buyer shall effect the payment immediately upon the first presentation of the bill(s) of exchange.
(3) 承兌交單：貨物發運后，賣方出具以買方為付款人的付款跟單匯票，付款期限為＿＿＿＿后＿＿日，按即期承兌交單(D/A＿＿日)方式，通過賣方銀行及＿＿＿＿＿＿銀行，經買方承兌后，向買方轉交單證，買方在匯票期限到期時支付貨款。
Documents against Acceptance: After shipment, the Seller shall draw a sight bill of exchange, payable_____ days after the Buyers delivers the document through Seller’s bank and _________Bank to the Buyer against acceptance (D/A ___ days). The Buyer shall make the payment on date of the bill of exchange.
(4) 貨到付款：買方在收到貨物后＿＿天內將全部貨款支付賣方（不適用于FOB、CRF、CIF術語）。
Cash on delivery (COD): The Buyer shall pay to the Seller total amount within ______ days after the receipt of the goods (This clause is not applied to the Terms of FOB, CFR, CIF).
14. 單據（Documents Required）：
賣方應將下列單據提交銀行議付/托收：
The Seller shall present the following documents required to the bank for negotiation/collection:
(1) 標明通知收貨人/受貨代理人的全套清潔的、已裝船的、空白抬頭、空白背書并注明運費已付/到付的海運/聯運/陸運提單。
Full set of clean on board Ocean/Combined Transportation/Land Bills of Lading and blank endorsed marked freight prepaid/ to collect;
(2) 標有合同編號、信用證號（信用證支付條件下）及裝運嘜頭的商業發票一式＿＿份；
Signed commercial invoice in ______copies indicating Contract No., L/C No. (Terms of L/C) and shipping marks;
(3) 由＿＿＿＿＿＿出具的裝箱或重量單一式＿＿份；
Packing list/weight memo in ______ copies issued by＿＿；
(4) 由＿＿＿＿＿＿出具的質量證明書一式＿＿份；
Certificate of Quality in _______ copies issued by＿＿＿＿；
(5) 由＿＿＿＿＿＿出具的數量證明書一式＿＿份；
Certificate of Quantity in ___ copies issued by＿＿＿＿；
(6) 保險單正本一式＿＿份(CIF 交貨條件)；
Insurance policy/certificate in ___ copies (Terms of CIF)；
(7)＿＿＿＿簽發的產地證一式＿＿份；
Certificate of Origin in ___ copies issued by＿＿＿＿；
(8) 裝運通知(Shipping advice): 賣方應在交運后_____小時內以特快專遞方式郵寄給買方上述第＿＿項單據副本一式一套。
The Seller shall, within ____ hours after shipment effected, send by courier each copy of the above-mentioned documents No. ＿＿.
(14)Force Majeure:
(a)If any contracting party could not fulfill the contract by resistance of force majeure, the period of time for compliance should be extended accordingly.
(b) Hindered side should telegraph the other in the force majeure and termination, and deliver the Certificate issued by the competent bodies of the accident to the other for recognition by registered air mail within 14 days after the accident.
(C)IF force majeure event continues more than 120 days, the other party have the right to send written notice by registered air mail, asking a party to terminate the contract, and notification come to effect immediately.
(15)Law Application:
(a)It will be governed by the law of the People's Republic of China under the circumstances that the contract is signed or the goods while the disputes arising are in the People's Republic of China or the defendant is Chinese legal person, otherwise it is governed by United Nations Convention on Contract for the International Sale of Goods.
(b)The terms in the contract are based on INCOTERMS 1990 of the International Chamber of Commerce.
(16)Arbitration:
(a)All disputes in connection with this contract or the execution thereof shall be settled friendly through negotiations.
(b)In case no settlement can be reached, the case shall then be submitted for arbitration to China International Economic and Trade Arbitration Commission in accordance with the provisional Rules of Procedures promulgated by the said Arbitration Commission.
(c)The arbitration shall take place in Beijing and the decision of the Arbitration Commission shall be final and binding upon both parties; neither party shall seek recourse to a law court or other authorities to appeal for revision of the decision. (d)Arbitration fee shall be borne by the losing party.
(17)Additional terms:
This contract shall come to effect since being signed/sealed by both parties. Each party holds one copy.
Representative of the sellers:
Representative of the buyers:
【英文合同模板匯編10篇】相關文章：
英文合同模板匯總7篇03-14
英文合同模板集錦9篇03-07
關于英文介紹信模板匯編5篇06-07
英文實習證明模板01-21
實習證明模板 英文11-12
最新英文訃告模板09-25
【推薦】英文感謝信模板匯編七篇02-14
顧問合同模板匯編10篇03-20
授權合同模板匯編五篇03-18
律師合同模板匯編9篇03-18